Technical and performance features:
Fuel burner：
1. Single-section operation (on/ off);
2. Can adapt to any type of burning rooms;
3. Air and burning air are mixed in combustion head;
4. Through adjusting burning air and combustion head to receive best burning parameter;
5. Can directly take off mixing unit without disassembling burner from boiler, convenient to maintain;
6. Manually regulate air flux;
7. Can select fuel valve group with leakage-inspection device;
8. Adopt a flange and an insulation sealing washer to connect to the boiler and fasten;
9. According to special requirements, we can offer longer combustion head than standard one, and automatic shutdown device for vent as well to avoid heat loss when stopping.
|
Structure features:
Burner includes:
1. Light aluminum alloy fan parts;
2. High-performance centrifugal fan;
3. Burning air inlet with flux regulating device, manual shutdown vent;
4. Slip-on flange matched with various boiler flanges, can adjust the position that burner extends to heating furnace;
5. Three-phase motor drives fan and oil pump；
6. Air pressure switch to ensure there is burning air in it;
7. Fuel valve group is made up of operation valve, safety valve, minimum pressure switch, booster as well as fuel filter;
8. Servomechanism and instruction equipment of burner standard;
9. Ionization electrode inspects flame;
10. Control panel includes: on/ off switch, indicator for operation and failure;
11. Can connect microampere meter to ionizing cable;
12. Electric protection grade of standard collocation is IP40,and the grade can be enhanced if necessary.
|
